OnePlus Ace 2 Pro PJA110 unbrick: EDL, Fastboot and bootloop fix

OnePlus Ace 2 Pro PJA110 unbrick: EDL, Fastboot and bootloop fix
Log in to access external download links.These links are hosted outside NCUnlock. Please log in, then post the required phrase as a comment or review to unlock them.

OnePlus Ace 2 Pro PJA110 unbrick service path

If the OnePlus Ace 2 Pro PJA110 is stuck in EDL, bootloop, Fastboot, recovery loss, black screen or dead after flashing, start with OnePlus Ace 2 Pro unbrick service.

  • NCUnlock checks whether the phone is recoverable remotely before flashing.
  • Prepare the model code, current state, firmware build if visible, and whether the phone shows Qualcomm 9008 on the PC.
  • For newer OnePlus hard-brick cases, compare OnePlus 15 unbrick service.

How to Unbrick Oneplus Ace 2 Pro Pro PJA110 Stock Firmware ROM (Flash File). By using this firmware, you can solve all software issues within your OnePlus Ace 2 Pro PJA110. Such as hanging on the logo, FRP reset, fixing stuck Fastboot Mode, BootLoop (Lost Fastboot – Lost Recovery), stuck EDL (black screen), or white after flashing, dead after flashing, etc.

What is Unbricking?

Unbricking is the process of restoring a device to its factory settings. It is a process used to fix a device that has become “bricked”, meaning that it is no longer functioning properly or has become unresponsive. Unbricking can be used to fix a wide range of issues, from software glitches to hardware failures.When a device is bricked, it is unable to boot up or respond to any inputs. This can be caused by a variety of issues, such as a corrupted operating system, a failed software update, or even a hardware defect. Unbricking is the process of restoring the device to its original factory settings, which can help to fix the issue and get the device working again.Unbricking is not always successful, and the process can be complex and time-consuming. It is important to be aware of the risks involved before attempting to unbrick a device. It is also important to make sure that you have the necessary knowledge and tools to complete the process before attempting it.

What Causes a Phone to Become Bricked?

When it comes to smartphones, bricking is one of the most dreaded issues that can occur. But what exactly is bricking and what causes a phone to become bricked? Bricking occurs when a phone is rendered useless due to a software issue. It is usually caused by a failed update, a corrupted file, or a virus.When a phone becomes bricked, it will no longer turn on or respond to any commands. The phone may also display error messages or show a blank screen. The only way to fix a bricked phone is to restore it to its original factory settings. In some cases, a bricked phone can be repaired by flashing a new firmware. This process requires specialized software and technical knowledge, so it should only be attempted by experienced users. In other cases, a bricked device may be beyond repair and must be replaced. This is why it’s important to back up your data regularly and keep your phone’s software up to date. Doing so can help you avoid the issue of bricking altogether.

Firmware Unbrick OnePlus Ace 2 Pro

Firmware (Flash file)
OnePlus Ace 2 Pro PJA110 Firmware (China Firmware)
PJA110domestic_11_13.1.1.302CN01_2023072223340105.zip:

Flash Tools + Driver

OplusFlashTool_v5.0.3.7_for_Sales.zip: Download

Flash Tool All Version:

Oppo_Latest_MTK_QCOM_Driver_Setup_V2.0.1.1: 

Qualcomm_Drivers_QDLoader: 

Usb_driver_r13-windows: 

Qualcomm, MTK platform – USB driver installation

Qualcomm and MTK Universal Driver: 

  1. Download the driver file from the network disk :
  2. Double-click to install (the default path does not need to be changed)
  3. Pop up a security window (always allow installation)
  4. Select restart the computer now
  5. Complete.
Qualcomm-MTK-USB-Driver
Qualcomm-MTK USB Driver

How to Unbrick OnePlus Ace 2 Pro

Flashing tool operation guide

  1. Unzip and run the program
  2. Log in to the accountImport the flash package

    Unbrick OnePlus Nord N20 5G Login
    Unbrick OnePlus Nord Ace 2 Pro Login
  3. Verify the flash package
  4. Unbrick OnePlus Nord N20 5G Select
    Unbrick OnePlus Ace 2 Pro Select
  5. Click “Start” button
  6. Conect EDL Mode
  7. Wait for the green progress bar to appear Release the button
  8. Wait for the prompt that the USB download is complete.
How to Unbrick OnePlus Ace 2V
How to Unbrick OnePlus Ace 2 Pro Done

How to reboot to EDL

Method 1:

After the phone is turned off, press and hold the volume up key and volume down key at the same time
Plug in the data cable to connect the phone;
After the green progress bar appears on the flashing interface, release the button

Method 2:

Connect one end of the USB cable to your PC.
Then connect the other end to your device.
Now press and hold the Volume Up, Volume Down, and Power keys. after the software launches, remove your hands (or when you see qualcomm 9008 appear in device manager)

Contact me if you can’t do it:

You can also use our service:

OnePlus
Remote session No shipping Guide below

OnePlus Ace 2 Pro PJA110 unbrick service – EDL repair

$25

Remote OnePlus Ace 2 Pro PJA110 unbrick service for EDL mode, bootloop, Fastboot loss, black screen, failed firmware flash and stock ROM repair.

Remote service Worldwide support with no phone shipping.
Live operator Telegram and WhatsApp support during the session.
Technical notes below Guide, compatibility, and reviews stay on the same page.

Description

OnePlus Ace 2 Pro PJA110 remote repair

This service is for OnePlus Ace 2 Pro PJA110 phones that are stuck in EDL/Qualcomm 9008, bootloop, Fastboot, black screen, recovery loss or dead-after-flash states.

  • NCUnlock checks the device state and firmware target before the remote unbrick session.
  • Read the OnePlus Ace 2 Pro PJA110 unbrick guide for firmware notes before ordering.
  • If the phone still boots but has a regional call/SIM restriction, choose the matching region-unlock service instead.
  1. Download your firmware
  2. Download and install ultraviewer to pc: Here
  3. Send oder number + Ultraviewer (ID + PASSWORD) to me

How the remote unbrick service works

This service restores a phone that is stuck in bootloop, Fastboot, recovery, black screen or Qualcomm EDL 9008 / MediaTek BROM mode. Support identifies the mode first, then flashes the correct official firmware for your exact model and region.

Steps

  1. Send your model details and describe the problem.
  2. Support confirms compatibility, scope and price.
  3. Install UltraViewer or AnyDesk on a Windows PC and connect the phone with a good USB cable.
  4. A technician completes the job remotely while you watch. You never ship the phone.

What to send

  • A screenshot of Settings → About phone, or the model number from the box if the phone does not boot.
  • What happened before the problem (update, flashing, root, relock) and the result you want.

Read first: Soft brick vs hard brick: how to identify EDL, Fastboot and BROM. Questions? Contact NCUnlock on Telegram or WhatsApp.

Reviews

There are no reviews yet.

Be the first to review “OnePlus Ace 2 Pro PJA110 unbrick service – EDL repair”

Service process

How this remote service works

1. Choose the service Confirm the device and model from the product page above.
2. Complete payment or request price Use the custom NCUnlock payment or contact popup already attached to the product.
3. Connect remotely Prepare USB, drivers, and UltraViewer so the technician can start immediately.
4. Follow the technical guide Use the guide and compatibility sections below before and during the session.

Product details

Technical Guide

Description

OnePlus Ace 2 Pro PJA110 remote repair

This service is for OnePlus Ace 2 Pro PJA110 phones that are stuck in EDL/Qualcomm 9008, bootloop, Fastboot, black screen, recovery loss or dead-after-flash states.

  • NCUnlock checks the device state and firmware target before the remote unbrick session.
  • Read the OnePlus Ace 2 Pro PJA110 unbrick guide for firmware notes before ordering.
  • If the phone still boots but has a regional call/SIM restriction, choose the matching region-unlock service instead.
  1. Download your firmware
  2. Download and install ultraviewer to pc: Here
  3. Send oder number + Ultraviewer (ID + PASSWORD) to me

How the remote unbrick service works

This service restores a phone that is stuck in bootloop, Fastboot, recovery, black screen or Qualcomm EDL 9008 / MediaTek BROM mode. Support identifies the mode first, then flashes the correct official firmware for your exact model and region.

Steps

  1. Send your model details and describe the problem.
  2. Support confirms compatibility, scope and price.
  3. Install UltraViewer or AnyDesk on a Windows PC and connect the phone with a good USB cable.
  4. A technician completes the job remotely while you watch. You never ship the phone.

What to send

  • A screenshot of Settings → About phone, or the model number from the box if the phone does not boot.
  • What happened before the problem (update, flashing, root, relock) and the result you want.

Read first: Soft brick vs hard brick: how to identify EDL, Fastboot and BROM. Questions? Contact NCUnlock on Telegram or WhatsApp.

Product details

Customer Reviews

Reviews

There are no reviews yet.

Be the first to review “OnePlus Ace 2 Pro PJA110 unbrick service – EDL repair”

Comments

2 comments

  1. Hello; I paid the 15 dollars to repair my bricked OnePlus Ace 2 phone. I downloaded the Flash Tool which is on the site I need the account ID and password. I haven’t received anything so far. I paid by Paypal yesterday 01/21/2024. Help me, thanks.

Join the discussion